TURBOCHARGER TURBINE INLET STUD KIT
For Exhaust Manifold To Turbine Inlet
Catalog # 15012
INSTALLATION INSTRUCTIONS
Description: Contains the necessary hardware to mount the turbine inlet to the exhaust manifold. The hardware is constructed of
high-quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.
•
Kit Contents:
Qty.
Description
1.45”
K 4 Stud, 8mm x 1.25 x 1.45” long
K 4 Nut, 8mm x 1.25
K 4 Washer, 8mm
•
INSTALLATION:
Towards Exhaust
Manifold
Towards Turbine
Inlet
1. Hand tighten the 1.45” long studs into the exhaust
manifold, with the shorter threads towards the manifold
(See Fig. 1).
Fig. 1
2. When attaching the turbocharger to the exhaust manifold,
and the turbo outlet elbow to the turbocharger, use an 8mm
washer under each nut, and hand tighten the 8mm x 1.25
nuts onto the studs.
Edelbrock Corporation
2700 California St. • Torrance • CA • 90503
Tech Line: 1-800-416-8628
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately
16 ft/lbs).
E-Mail: Edelbrock@Edelbrock.com
Catalog #15012
Rev. 5/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0391
TURBOCHARGER TURBINE INLET STUD KIT
For Exhaust Manifold To Turbine Inlet
Catalog # 15012
INSTALLATION INSTRUCTIONS
Description: Contains the necessary hardware to mount the turbine inlet to the exhaust manifold. The hardware is constructed of
high-quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.
•
Kit Contents:
Qty.
Description
1.45”
K 4 Stud, 8mm x 1.25 x 1.45” long
K 4 Nut, 8mm x 1.25
K 4 Washer, 8mm
•
INSTALLATION:
Towards Exhaust
Manifold
Towards Turbine
Inlet
1. Hand tighten the 1.45” long studs into the exhaust
manifold, with the shorter threads towards the manifold
(See Fig. 1).
Fig. 1
2. When attaching the turbocharger to the exhaust manifold,
and the turbo outlet elbow to the turbocharger, use an 8mm
washer under each nut, and hand tighten the 8mm x 1.25
nuts onto the studs.
Edelbrock Corporation
2700 California St. • Torrance • CA • 90503
Tech Line: 1-800-416-8628
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately
16 ft/lbs).
E-Mail: Edelbrock@Edelbrock.com
Catalog #15012
Rev. 5/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0391
|
Edimax Technology Network Router VO 4500SK V20 User Manual
Eicon Networks Network Card CTbus User Manual
Eiki CRT Television LC SM2 User Manual
Eiki Projector EIP 250 User Manual
EverFocus TV Cables EHA CRX User Manual
Furuno Radar Detector 1723C User Manual
GE Cordless Telephone 16179610 User Manual
Gefen Network Card GTV HT AUDPROC User Manual
Gemini Microphone UF 1064 User Manual
Generac Portable Generator 04077 1 04109 1 04079 1 00789 1 00844 1 User Manual