Ei Electronics Smoke Alarm Ei184 User Manual

Model Ei 184 Heat Alarm

Fixed temperature fast response thermistor type

sensor, range 54°C to 62°C

Supply voltage 10.5 – 30 VDC

Test/Hush button

Interconnect up to 12 alarms

Relay contacts

Built in sounder

Automatic reset facility

Kitemarked to BS5446-2: 2003

5 year guarantee

Product Description

Operation

The heat alarm will activate the built in sounder

upon detecting heat that reaches 58ºC

The Ei184 is a Heat Alarm that is designed to operate

with suitable 8-30 volt control panels and to provide a

loud local alarm.

The heat alarm will automatically reset itself and

silence the sounder when the temperature drops

below the preset level.

The Ei184 has advanced features such as the ability to

interconnect up to twelve alarms to allow all alarms to

sound if just one of the interconnected alarms should be

triggered.

The built in sounder will provide a minimum sound

output of 85dB at 3m

Relay contacts (normally open and closed supplied) are

available for triggering the panel itself and its associated

ancillary products, such as extra loud sirens, magnetic

door holders etc.

The “Test/Hush” button will silence nuisance alarms

if any

The “Test”/Hush button will simulate the effect of

heat and tests sensor, electronics and horn-use to

check performance at least monthly

The Ei184 is ideal for use in kitchens and garages,

where the use of optical or ionisation alarms would lead

to unwanted nuisance alarms.

The Ei184 is easily installed and comes supplied with all

necessary screw fixings..

Shannon Free Zone, Shannon, Co. Clare, Ireland.

Ph.+353 61 471277 Fx.+353 61 471053

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice.

Ei184 DataSht RevB